|
B-TW9919 Twin Intel Blade
|
Model #: B-TW9919
|
Untitled Document
Key Features
Two nodes in a Processor Blade. Each node supports the following:
- Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s
- Intel® 5500 (Tylersburg) Chipset
- Up to 128GB DDR3 1333/ 1066/ 800MHz
ECC Registered DIMM / 32GB
Unbuffered DIMM
- Intel® 82576 Dual-Port Gigabit
Ethernet
- 2 x 2.5" Hot-Plug SATA Drive Trays
- Integrated Matrox G200eW Graphics
- Integrated IPMI2.0 w/ remote KVM and
virtual media
- Mellanox ConnectX QDR InfiniBand
40Gbps or 10GbE support (Optional)
- Up to four hot-swap 2500W power supplies, N+1 redundant
Specifications
Model |
|
Chassis Profile |
7U Full Depth |
Compute Blade Processor Support |
Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon®processor(s) of the same type below:
- Intel® Xeon® Processor X5600/E5600/L5600 Series
(Westmere) 40W - 95W
- Intel® Xeon® Processor X5500/E5500/L5500 Series
(Nehalem-EP) 38W - 95W
|
Maximum Number of Processors per 42U Rack |
40 Intel® 64-bit Xeon®processor(s)
1440 CPU cores per 42U rack |
Motherboard Chipset |
Intel® 5500 (Tylersburg) chipset, ICH10R + IOH-24D |
Compute Blade Memory Support per Node |
16 DDR3 memory DIMM slots
Supports 128GB DDR3 1333 / 1066 / 800MHz DDR3 ECC Registered memory ECC Registered memory or 32GB DDR3 1333 / 1066 / 800MHz DDR3 ECC unbuffered memory
Supports 2.5TB DDR3 memory per 7U chassis |
Storage |
2 x 2.5" hot-plug drive bays for SATA and SSD, supports SATA RAID 0, 1 |
Expansion Slots |
None |
InfiniBand Support |
Supports 4x QDR (40Gb) Infiniband per node via optional mezzanine HCA |
InfiniBand / Gigabit Ethernet Switch Options |
Up to 2x hot-plug 4x QDR Infiniband switches
Up to 2x hot-plug layer 3 Gigabit Ethernet switches |
Power Supply |
Up to 4x 2500W Power Supplies, N+1 redundant power supply |
IPMI Support |
Support for Intelligent Platform Management Interface (IPMI) v.2.0 via Chassis Management Module (CMM)
Up to 2x hot-plug management module providing remote KVM and IPMI 2.0 functionalities |
|
|
|
|