|
Enhance Technology RS16 IP-4 3U 16-Bay Enterprise 4-Port iSCSI RAID Storage
|
Model #: STOR-RS16IP4
* Whole number only
|
Untitled Document
Product Overview The RS16 IP-4, intelligent iSCSI RAID System, is the latest addition to the award-winning ULTRASTOR family with a built-in 64-bit RAID controller for mission critical applications. Utilizing the cost-effective 3Gbps Serial ATA disks, the UltraStor™ RS16 IP-4 offers Enterprise-grade solution for applications that demand nothing short of superior reliability. Designed to meet the challenge of high impact/high volume network storage requirements, the new UltraStor™ RS16 IP-4 can be configured in minutes and is becoming the new standard for simplified SAN storage. With hundreds of installations worldwide Enhance Technology's UltraStor™ product line has built a solid reputation in markets spanning from video broadcasting to emerging disk based backup & recovery infrastructures.
Features & Benefits
- Hybrid Serial ATA disk based storage, compatible 1.5 & 3.0Gbp/s disks
- Embedded hardware RAID controller with Four GbE ports
- 3U modular rack design easily integrates into existing storage infrastructures
- 4 GbE full iSCSI offload with load-balancing & fail-over
- One logic volume shared by as many as 16 hosts
- Windows VDS/VSS/MPIO support, host access control, & CHAP
- Easy LCD control, Remote monitoring and RAID management over TCP
|
Form Factor
 3U low profile 19” rackmount
16x SAS / SATA disk drive bays
System Architecture
SATA-to-GbE (10/100 Ethernet support)
SAS-to-GbE (10/100 Ethernet support)
Quad channel (GbE ports x4)
Disk Drive Interface
HDD: SATA/Serial ATA 1.5Gb/s or 3Gb/s
HDD: SAS/Serial Attached SCSI 15K RPM
RPM: 7200-15,000
Controller Architecture
Dedicated RAID processor
Dual PCI bus architecture
64-bit 133MHz PCI-X bridge
2GB cache
Upgradeable firmware in flash ROM
Controls and Indicators
Backlit LCD control panel
Power and drive failure indicators
Built-in alarm with mute button
RAID Operation
RAID level 0 ( 0+1 ), 3, 5, 6 and JBOD
Multiple array support
(up to 8 separate arrays)
Hot-swap drive support
Hot/global spare drive support
Online capacity expansion
Management
User configurable via control panel
RS232 VT100 ANSI terminal emulation
Event & fault notification to e-mail
Enclosure Specification
Hot-Swappability 16 x Removable HDD Tray
Drive Failure 16 x LED Indicator for each HDD
System Fan 2 hot-swappable blowers
Status LEDs 1 x access LED for each HDD
Fan-fail LED 1 x fan-fail LED for system
Mute Button 1 x mute button for fan &
temp alarm
Power Supply 1+1 Hot-swap Redundant
(2x 460Watt)
Dimension (H x W x D) 5.25" x 19" x 21.5"
Weight (without disk) 60 Lbs
Physical & Environment
Temperature built in thermal & fan sensor
Operating Temperature 10°C ~ 35°C
Non-Operating Temperature -10°C ~ 50°C
Operating Humidity 20% to 90%
non-condensing
Supported Operating System
Windows 95, 98/98SE, NT, 2000, Millennium,
XP, 2003
Mac 9.1 and above with ATTO iSCSI initiator
Linux (all latest builds) which support
iSCSI initiator
And all other systems supporting iSCSI protocol
Power Supply
Dual redundant removable power modules
1+1 hot swappable
AC input: 90 ~ 264 VAC, 47Hz ~ 63Hz
Continuous output power: 460W
Cooling
Three hot swappable fan modules
12V DC, 0.36A, 3-pin connector
Manufacturer Warranty
System Warranty 3 years
Certification FCC, CE, UL, TUV, BSMI, VCCI
|
|
|
|
|