|
Supermicro SuperServer 6015TW-INFB/V
|
Model #: SM-6015TW-INFB/V
* Whole number only
|
Key Features
Two systems (nodes) in a 1U form factor. Each node supports the following:
1. Quad & Dual Core Intel® 64-bit Xeon® Support 1066 / 1333 / 1600 MHz FSB
2. Up to 64GB DDR2 800/667/533 SDRAM Fully Buffered DIMM (FB-DIMM)
3. 1 (x16) PCI-Express Generation II
4. Intel® (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet Controller
5. 2x Hot-swap SATA Drive Bays
6. Infiniband MT25204 20Gbps Controller
7. 980W High-efficiency Power Supply
|
| SYS-6015TW-INFB
|
- SuperServer 6015TW-INFB (Black)
|
| SYS-6015TW-INFV
|
- SuperServer 6015TW-INFV (Silver)
|
|
|
|
|
| CPU
|
- Dual 771-pin LGA Sockets
- Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
- Quad-Core Intel®
Xeon®Processor
5400/5300LV sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz
- Dual-Core Intel®
Xeon®Processor
5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
| System Bus
|
- 1600 / 1333 / 1066 MHz system bus
|
|
|
|
|
| Memory Capacity
|
- Eight 240-pin DIMM sockets
- Supports up to 64 GB 800 / 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- Memory Sparing supported
|
| Memory Type
|
- 800 / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes
|
- 512 MB, 1GB, 2GB, 4GB, 8GB**
|
| Memory Voltage
|
|
| Error Detection
|
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
|
|
|
|
|
| Chipset
|
- Intel® 5400 (Seaburg) chipset
- ESB2
|
| Infiniband
|
- Mellanox MT25204AD-FCC-D Single-Port
|
| SATA
|
- Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI
|
- Support for Intelligent Platform Management Interface v.2.0, v.1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
|
| Network Controllers
|
- ntel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
|
| Graphics
|
- ATI ES1000 controller with 32 MB of video memory
|
| Super I/O
|
|
| Clock Generator
|
|
|
|
|
|
| Serial ATA
|
|
| LAN
|
|
| USB
|
- 2x USB rear ports
- 2x USB internal headers
- Total 4 USB 2.0 Compliant
|
| VGA
|
|
| Serial Port
|
|
| Infiniband
|
- 1 External Infiniband Connector
|
|
|
|
|
| BIOS Type
|
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features
|
- Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
|
|
|
|
|
| Form Factor
|
|
| Model
|
|
|
|
|
|
| Height
|
|
| Width
|
|
| Depth
|
|
| Gross Weight
|
|
| Available Colors
|
|
|
|
|
|
| Buttons
|
- Power On/Off button
- System Reset button
|
| LEDs
|
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
|
|
|
|
| PCI-Express
|
- 1 (x16) PCI-e Generation II slot
|
|
|
|
|
| Hot-swap
|
- 2x 3.5" SATA Hot-swap drive bays
|
|
|
|
|
| 1U SATA Backplane
|
|
|
|
|
| Fans
|
|
|
|
|
|
| 980W AC-DC power supply w/ PFC
|
| AC Input
|
- 100 - 240V, 60-50Hz, 14-6 Amp
|
| +5V sb
|
|
| +12V
|
|
|
|
|
|
| Software
|
- Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0
- Super
 Doctor III
- Watch Dog
- NMI
|
| Power Configurations
|
- ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
|
|
|
|
|
| CPU
|
- Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
- 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN
|
- Total of four proprietary fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
|
| Temperature
|
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- PSU I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED
|
- CPU / System Overheat LED
|
| Other Features
|
- Chassis intrusion detection
- Chassis intrusion header
|
|
|
RoHS
|
|
| Environmental Specifications
|
- Operating Temperature:
10°C to 35°C (50°F to 95°F)
- Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity:
8% to 90% (non-condensing)
- Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Part Number
|
Qty
|
Descriptin
|
| Motherboard / Chassis
|
MBD-X7DWT-INF-B
CSE-808TQ-980B(V)
|
2
1
|
Super X7DWT-INF Motherboard
1U Black SC808 Chassis (V = Silver)
|
| Backplane
|
BPN-SAS-808
|
1
|
1U SAS / SATA Backplane
|
| Cable(s)
|
CBL-0087
CBL-0201L
CBL-0212L
|
1
1
1
|
Front Panel Switch Cable (Round), 16-pin to 16-pin, 51cm, Pb-free
SATA Set of 4 (Round) Straight to Right Angle, (51/47/41/37)cm
Power Cord
|
| CD
|
CDR-X7
|
1
|
Driver CD
|
| Fan(s)
|
FAN-0085L
|
6
|
6-pin Counter-rotating Cooling Fan
|
| Front Panel
|
MCP-280-81301-0N
|
1
|
Front Control Panel
|
| Hard Drive
|
MCP-220-00001-03(01)
|
4
|
Silver Hot-swappable Hard Drive Trays (01 = Black)
|
| Heatsink / Retention
|
SNK-P0017
|
4
|
Please refer to our Thermal Components Matrix
|
| Mounting Rails
|
CSE-PT51L
|
1
|
1U Mounting Rail Kit
|
| Power Distributor
|
PDB-PT808-S20
|
1
|
Power Backplane
|
| Power Supply
|
PWS-981-1S
|
1
|
980W 1U Cold Swap 12V power supply
|
| Riser Card
|
RSC-R1U-E16R
|
2
|
1U: PCI- E x16 Slot to 1 PCI-E x16 Slot
|
|
|
|
|
|
|
|
|
|
|
Part Number
|
Qty
|
Description
|
| IPMI
|
AOC-SIMSO
AOC-SIMSO+
|
-
-
|
IPMI 2.0 w/ Virtual Media Over LAN
IPMI 2.0 w/ Virtual Media + KVM Over LAN
|
|
|
|
|
|
|
|
|