Mega Menu Drop Down

Supermicro SuperServer 1025TC-TB

Supermicro SuperServer 1025TC-TB
Price: $1,148.00
Model #: SM-1025TC-TB
Key Features
Two systems (nodes) in a 1U form factor. Each node supports the following:
1. Quad & Dual Core Intel® 64-bit Xeon® Support 1333 / 1066 MHz FSB
2. Up to 48GB 667/533MHZ DDR2 ECC Registered DIMM
3. 1 (x16) PCI-e slot (Low Profile)
4. Intel® 82573V + 82573L Gigabit Ethernet Controller
5. 4x Hot-swap 2.5" SATA Drive Bays
6. 780W High-efficiency Power Supply
Product SKUs
SYS-1025TC-TB
  • SuperServer 1025TC-TB (Black)
 
Motherboards

Super X7DCT + Super X7DCT
 
Processor/Cache
CPU
  • Dual 771-pin LGA Sockets
  • Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
    • Quad-Core Intel®
      Xeon®Processor
      5400/5300 sequence (Harpertown
      /Clovertown processor)
      up to 3.16 GHz
    • Dual-Core Intel®
      Xeon®Processor
      5200/5100 sequence (Wolfdale/Woodcrest processor)       up to 3.40 GHz
System Bus
  • 1333 / 1066 MHz system bus
Operating System Software
  • Supports 64-bit Operating Systems
  • Supports 32-bit Operating Systems
 
System Memory (per Node)
Memory Capacity
  • Six 240-pin DIMM sockets
  • Supports up to 48 GB 667/533MHz DDR2 ECC Register DIMM memory
  • Dual channels memory bus
Memory Type
  • 677/533MHzECC Register DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB**
Memory Voltage
  • 1.8V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices (per Node)
Chipset
  • Intel® 5100 (San Clemente) chipset
  • Intel® ICH9R SB
SATA
  • Intel ICH9R SB SATAII Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0 / 1.5
  • 200-pin IPMI slot (SIMSO(+))
  • (Optional: AOC-SIMSO(+))
  • KVM feature is available with dedicated LAN only
Network Controllers
  • Intel® 82573V & 82573L Gigabit Ethernet Controllers
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT support for fast, scaleable, and reliable networking
Graphics
  • ATI ES1000 controller with 32 MB of video memory
Super I/O
  • Winbond W83627HG chip
Clock Generator
  • ICS9LPR501 chip
 
Input / Output (per Node)
Serial ATA
  • Four Serial ATA ports
  • Four SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
USB
  • 2 rear + 1 Type A connector + 2 headers (2 Ports)
  • 5 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA Port
Serial Port / Header
  • 1 Fast UART 16550 serial port
 
System BIOS
BIOS Type
  • 16Mb SPI Flash with Phoenix ® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 1.0/2.0/3.0
  • USB Keyboard support
  • Hardware BIOS Virus protection
Chassis
Form Factor
  • 1U Rackmount
Model
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 27.75" (705mm)
Gross Weight
  • 40 lbs (18.1kg)
Available Colors
  • Black
 
Front Panel (per Node)
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
 
Expansion Slots (per Node)
PCI-Express
  • 1 (x16) PCI-e slot (Low Profile)
 
Drive Bays (per Node)
Hot-swap
  • 4x 2.5" SATA Hot-swap drive bays
 
SATA Backplane
1U SATA Backplane
 
System Cooling
Fans
  • 6x Cooling Fans
 
Power Supply
700W / 780W AC to DC power supply w/ PFC
AC Input
  • 100-240V, 60-50Hz, 9.5-3.5Amp
+5V sb
  • 4 Amp
+12V
  • 65 Amp @ 180-240Vac
  • 58 Amp @ 100-140Vac
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0
  • Super Doctor III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI Power Management
  • Main Switch Override Mechansim
  • Power-on mode for AC power recovery
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT
  • CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
  • Total of three 4-pin fans
  • 3x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 8x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend-state Indicator LED
Other Features
  • SDDC Support
 
Operating Environment / Compliance
RoHS
RoHS 5/6
Environmental Specifications
  • Operating Temperature:
       10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
       -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
       8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
       5% to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Descriptin
Motherboard / Chassis MBD-X7DCT-B
CSE-809T-780B 		2
1 		Super X7DCT Motherboard
1U Black SC809 Chassis
Backplnae BPN-SAS-809T 1 1U SAS / SATA Backplane
Cable(s) CBL-0087
CBL-0201L
CBL-0212L 		2
1
1 		Front Panel Switch Cable (Round), 16-pin to 16-pin, 51cm, Pb-free
SATA Set of 4 (Round) Straight to Right Angle, (51/47/41/37)cm
Power Cord
CD CDR-X7 1 Driver CD
Fan(s) FAN-0085L4 6 4-pin Counter-rotating Cooling Fan
Front Panel MCP-280-81301-0N 2 Front Control Panel
Hard Drive MCP-220-00001-03(01) 4 Silver Hot-swappable Hard Drive Trays (01 = Black)
Heatsink / Retention SNK-P0017 4 Please refer to our Thermal Components Matrix
Mounting Rails CSE-PT51L 1 1U Mounting Rail Kit
Power Distributor PDB-PT808-S20 1 Power Backplane
Power Supply PWS-781-1S 1 780W 1U Cold Swap 12V power supply
Riser Card RSC-R1U-E16R 2 1U: PCI- E x16 Slot to 1 PCI-E x16 Slot
Optional Parts List
  Part Number Qty Description
IPMI AOC-SIMSO
AOC-SIMSO+ 		-
- 		IPMI 2.0 w/ Virtual Media Over LAN
IPMI 2.0 w/ Virtual Media + KVM Over LAN