Mega Menu Drop Down

SuperServer 6016GT-TF-TM1 GPU solution

Price: $2,183.00
Model #: 6016GT-TF-TM1
Product SKUs
SYS-6016GT-TF-TM1
  • SuperServer 6016GT-TF-TM1 (Black)
 
Motherboards

Super X8DTG-DF
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Quad-Core Intel®
      Xeon®Processor 5500 sequence (Nehalem-EP processor)
  • NOTE: Support processors with Max TDP < 100W
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 12x 240-pin DIMM sockets
  • Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB, 8GB
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices
GPU
  • 1x Nvidia Tesla M1060 GPU Cards
Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW 8 MB DDR2
Super I/O
  • Winbond W83527HG chip
Clock Generator
  • 932S421 chip
 
Input / Output
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA Port
Serial Port
  • 1 Fast UART 16550 serial port
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Chassis
Form Factor
  • 1U Rackmount
Model
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 28.2" (716mm)
Gross Weight
  • 38 lbs (17.2 kg)
Available Color
  • Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED / Fan fail LED /
    UID LED
 
Expansion Slots
PCI-Express
  • 1 (x4) PCI-E 2.0 (in x16 slot -Low Profile)
 
Drive Bays
Hot-swap
  • 3x 3.5" Hot-swap SAS/SATA drive bays
 
Backplane
SAS/SATA HDD Backplane
 
System Cooling
Fans
  • 8x 4cm heavy-duty counter-rotating PWM fans with optimal fan speed control
 
Power Supply
1400W high-efficiency power supply with PMBus
AC Input
  • 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
  • 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output
+5V standby
  • 4 Amp
DC Output
+12V
  • 100 Amp @ 100-140V
  • 116 Amp @ 180-240V
Certification 80 PLUS Gold
  80 PLUS Gold Certified
  [ Test Report ]
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator
FAN
  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED
Other Features
  • SDDC Support
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Descriptin
Motherboard / Chassis MBD-X8DTG-DF
CSE-818G-1400B 		1
1 		Super X8DTG-DF Motherboard
1U Black SC818G Chassis
Air Shroud MCP-310-18008-0N 2 Air Shroud
Hard Drive Tray MCP-220-00001-01 3 Hot-swappable Hard Drive Trays
Add-On Card AOC-GPU-NVM1060 1 NVIDIA M1060 TESLA GPU/PASSIVE HEATSINK
Backplane BPN-SAS-818TQ 1 Sup 3X SAS/SATA hdd; SATA con
Cable 1 CBL-0157L 1 8pin to 8pin ribbon cable with tube for SGPIO, 40cm, PBF
Cable 2 CBL-0315L 3 35CM SATA FLAT S-S W/ LATCH PBF
Cable 3 CBL-0333L 2 GRAPHIC CARD POWER CABLE 8PIN TO 6+2PIN(40CM)
CD CDR-X8 1 For X8 series
Riser Card RSC-R1U-E16R 1 RSC-R1U-E16R
Riser Card RSC-R1UG-2E8GR 1 RSC-R1UG-2E8GR-O-P
Riser Card RSC-R1UG-E16 1 RSC-R1UG-E16-O-P (left side PCIEx16 riser card)
Heatsink / Retention SNK-P0037P 2 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)
Power Supply PWS-1K41F-1R 1 1400W 1U GOLD LEVEL PWS W/ PM BUS & WX106MM
Cable 4 CBL-0087 1 Front ctrl cable ROUND 16 TO 16 PIN RIBBON 20\"
Fan 1 FAN-0087L4 2 40x56,4 Pin PWM Fan Assembly for SC512F, 811
Fan 2 FAN-0102L4 6 40x56,4 Pin,PWM, Primary for SC818,825M, Secondary for SC815
Mounting Rails MCP-290-00054-0N 1 Rail set, quick/quick, optional for 1U 17.2\"W SC815
Optional Parts List
  Part Number Qty Description
Riser Card RSC-R1UG-UR - 1U Riser Card
Peripheral Drive 1 MCP-220-81502-0N - Slim SATA DVD kit for SC213,812S,813,815,816,818,819,825,836