Mega Menu Drop Down

SuperServer 1026TT-IBQF

Price: $2,186.00
Model #: 1026TT-IBQF
SYS-1026TT-IBQF
  • SuperServer 1026TT-IBQF (Black)
 
Motherboards

Super X8DTT-IBQF + Super X8DTT-IBQF
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Quad-Core Intel®
      Xeon®Processor 5500 sequence (Nehalem-EP processor)
  • NOTE: Support processors with Max TDP < 100W
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 12x 240-pin DIMM sockets
  • Supports up to 96 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB**
Memory Voltage
  • 1.5 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
 
On-Board Devices (per Node)
Infiniband
  • Mellanox ConnectX QDR Infiniband 40Gbps Controller
Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82576 Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW 16 MB DDR2
Super I/O
  • Winbond W83527HG chip
Clock Generator
  • 932S421 chip
 
Input / Output (per Node)
Serial ATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA Port
Serial Port
  • 1 Fast UART 16550 serial port
Infiniband
  • 1 External QSFP Infiniband Connector
 
System BIOS (per Node)
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-809TQ-1200B
 
Dimensions
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 27.75" (705mm)
Gross Weight
  • 40 lbs (18.1kg)
Available Colors
  • Black
 
Front Panel (per Node)
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
 
Expansion Slots (per Node)
PCI-Express
  • 1 (x16) PCI-E ( Low Profile)
 
Drive Bays (per Node)
Hot-swap
  • 4x 2.5" SATA Hot-swap drive bays
 
SATA Backplane
1U SATA Backplane
 
System Cooling
Fans
  • 6x Cooling Fans
 
Power Supply
1200W high-efficiency power supply with PMBus
AC Input
  • 100 - 140V, 50 - 60Hz, 7.5 - 11Amp
  • 180 - 240V, 50 - 60Hz, 5 - 8Amp
DC Output
+5V standby
  • 4 Amp
DC Output
+12V
  • 74 Amp @ 100-140V
  • 100 Amp @ 180-240V
Certification 80 PLUS Gold
  80 PLUS Gold Certified
  [ Test Report ]
 
Management
Software
  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • Super Doctor III
  • Watch Dog
  • NMI
Power Configurations
  • ACPI Power Management
  • Main Switch Override Mechansim
  • Power-on mode for AC power recovery
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator
FAN
  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED
Other Features
  • SDDC Support
 
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)
Parts List - (Items Included)
  Part Number Qty Description
Motherboard / Chassis MBD-X8DTT-IBQF
CSE-809TQ-1200B 		2
1 		Super X8DTT-IBQF Motherboard
1U Chassis
Backplane BPN-SAS-809TQ 2 Sup 4x2.5ö SAS/SATA hdd; SATA con
Cable 1 CBL-0157L-01 2 8pin to 8pin cable for SGPIO, 61.5cm, PBF
Cable 2 CBL-0207L 2 59CM SATA ROUND S-S PBF
Cable 3 CBL-0226L 2 43CM SATA ROUND S-RA PBF
Cable 4 CBL-0227L 2 48CM SATA ROUND S-RA PBF
Cable 5 CBL-0228L 2 55CM SATA ROUND S-RA PBF
CD CDR-X8 1 For X8 series
Riser Card RSC-R1U-E16R 2 RSC-R1U-
Heatsink / Retention SNK-P0037P 4 1U PASSIVE CPU HS FOR INTEL LGA1366 (HTP)
Power Distributor PDB-PT808-S20 1 PDB FOR 808 CHASSIS
Power Supply PWS-1K21P-1R 1 1200W 1U GOLD LEVEL PWS WITH PM BUS
Air Shroud MCP-310-18008-0N 2 Mylar air shroud for X8 DP, SC808, SC809
Cable 6 CBL-0087 2 Front ctrl cable ROUND 16 TO 16 PIN RIBBON 20\"
Cable 7 CBL-0303L 2 4PIN POWER CABLE, ST TO RA, 40CM
Fan 1 FAN-0085L4 6 40x56 4pin PWM Primary for SC816,819,808,Sec. for SC809,111
Fan 2 FAN-0101L4 6 40x56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808
Drive Tray(s) MCP-220-00047-0B 8 Black hot swap 2.5\" SAS/SATA HDD tray
Mounting Rails MCP-290-00042-0V 1 set Rail set for SC808,809,818