1906SS

Price: call for pricing
Model #: LZS-1906SS
Untitled Document

 

Two Intel Xeon 5600 Based 1U Storage Server with 8 2.5” Hot-Swap SAS/SATA HDD & Intel® 82599EB 10 Gigabit + 82576 Dual-Port Gigabit Ethernet Controller

  • Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
  • Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
  • Left Slot (Full-height / Full-length): 2 (x8) PCI-E 2.0 slots
  • Right Slot (Low-Profile - 5.5" depth): 1 (x4) PCI-E 2.0 (in x8 slot)
  • LSI 2108 8-Port 6Gbps SAS Controller; RAID 0, 1, 5, 6, 10, 50, 60
  • Intel® 82599EB 10 Gigabit + 82576 Dual-Port Gigabit Ethernet Controller
  • 8 x 2.5" Hot-swap SAS/SATA Drives, For Customizable Storage
  • 700W Gold-Level Redundant Power Supply

 

 

CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Intel® Xeon® Processor X5600/E5600/L5600 Series
      (Westmere) 40W - 130W

    • Intel® Xeon® Processor X5500/E5500/L5500 Series
      (Nehalem-EP) 38W - 95W

Memory Capacity
  • 18x 240-pin DIMM sockets
  • Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R
SAS
  • LSI 6Gbps SAS 2108 w/ Hardware RAID support
  • RAID 0, 1, 5, 6, 10, 50, 60 support
  • BBU (battery backup) extension kit (optional)
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Intel® 82599EB 10 Gigabit Ethernet Controller with 2 SFP+ interfaces
  • Intel® 82576 Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics
  • Matrox G200eW
SAS
  • 8x 6Gbps SAS / SATA ports with 2 I-PASS connectors
SATA
  • Six Serial ATA ports
  • Six SATA hard drives supported
LAN
  • 2x RJ45 LAN ports
  • 2x SFP+ LAN port
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 2x USB rear ports
  • 1x USB on-board
  • 2x USB internal headers
  • Total 5 USB 2.0 Compliant
VGA
  • 1x VGA Port
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header (Option)
Chassis
  • Height * 1.7" (43mm)
  • Width * 17.2" (437mm)
  • Depth * 27.75" (705mm)
  • Gross Weight * 43 lbs (19.45 kg)
qote