|
SuperServer 5026Ti-BTRF
|
Model #: SYS-5026Ti-BTRF
* Whole number only
|
|
|
|
|
|
|
SYS-5026Ti-BTRF
|
- SuperServer 5026Ti-BTRF (Black)
|
|
|
CPU
|
- LGA 1156 Socket
- Intel® Xeon® X3400 series
- Intel® Xeon® L3400 series
- Intel® Core™ i3
- Intel® Pentium® G6950
- Intel® Celeron® G1101
|
|
|
Memory Capacity
|
|
Memory Type
|
- 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
|
DIMM Sizes
|
|
Memory Voltage
|
|
Error Detection
|
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
|
Chipset
|
|
SATA
|
- 6x SATA (3 Gbps)
- RAID 0, 1, 5 support (Windows)
- RAID 0, 1 support (Linux)
|
IPMI
|
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers
|
- Dual Intel® 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
VGA
|
|
Super I/O
|
|
|
|
Serial ATA
|
- Six Serial ATA ports
- 3 SATA hard drives supported
|
LAN
|
- 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB
|
- 2x USB rear ports
- 1x USB on-board
- 2x USB internal header (4 ports)
- Total 7 USB 2.0 Compliant
|
VGA
|
|
Serial Port
|
- 1 Fast UART 16550 serial port
|
|
|
BIOS Type
|
- 32Mb SPI Flash EEPROM with AMI® BIOS
|
BIOS Features
|
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
|
|
|
|
Form Factor
|
|
Model
|
|
|
|
Height
|
3.5" (89mm)
|
Width
|
17.2" (437mm)
|
Depth
|
28.5" (724mm)
|
Gross Weight
|
85 lbs (38.6kg)
|
Available Colors
|
Black
|
|
|
Buttons
|
- Power On/Off button
- UID button
|
LEDs
|
- Power LED (on power button)
- Network activity LED
- System Overheat/fan fail/power fail/ LED
- UID LED (on UID button)
|
|
|
PCI-Express
|
- 1 (x16) PCI-E 2.0 (Low Profile)
|
|
|
Hot-swap
|
- 3x 3.5" SATA Hot-swap drive bays
|
|
|
2U Hard drive Backplane
|
|
|
Fans
|
|
|
|
920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
|
AC Input
|
- 100-240 V, 50-60 Hz, 11-4.5 Amp
|
DC Output
|
- 4 Amp @ +5V standby
- 75 Amp @ +12V
|
With Power Distributor
|
- +5V: 50 Amp
- +3.3V: 30 Amp
- -12V: 0.6 Amp
|
Certification
|
80PLUS
Platinum Certified
[ Test Report ]
|
|
|
CPU
|
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
FAN
|
- Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature
|
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED
|
- CPU / System Overheat LED
- +5V Standby alert LED
|
Other Features
|
- Chassis intrusion detection
- Chassis intrusion header
|
|
RoHS
|
|
Environmental Spec.
|
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
|
|
|
|
|